Enquiry about our project off cuts now available from 1m2, 2m2, 3m2 and 4m2 in both short $10 psm and long pile $15psm.

[0]
image
Shop Online

Test 12mm Cricket Grass

Test wicket 12mm synthetic grass is suitable for centre pitches and training wickets.   The perfect pitch to mimic the fast pace Australian natural turf pitches of the WACA and the GABBA.

The softer fibre composition  of Test Wicket plays faster with a higher bounce. Turf Wicket exclusive yarn is made  100% Australian Made.

Our synthetic grass cricket wickets are available in widths of 1.85mts, 2.8mts, and 3.71m and in varying lengths to suit your wicket requirements.

AUD $38.00/psm
Length*
Width*

This product comes with an 8 year manufacturer’s warranty protecting the consumer’s product against UV protection failure, manufacturer’s workmanship, primary and secondary backing failure, unreasonable product deterioration under normal usage circumstances. The warranty does not cover misuses, negligence, incorrect installation methods or use of non-specified chemicals on the surface.

This product is made with a heavy metal free yarn which is protected against UV degradation and light fastness to meet the highest standards.

TURF WICKET 9.5mm

Turf Wicket is a 2/tone sandy coloured 9.5mm synthetic grass suitable for centre pitches and training wickets.   The perfect pitch to mimic the fast pace Australian natural turf pitches of the WACA and the GABBA.
  1. Colour:                      Beige/Sandy
  2. Pile Height:              9.5mm
  3. Stiches Rate:            29 per 10cm
  4. Width:                        Roll width sizes are 1.85, 2.8 and 3.66
  5. Total Weight:           2047 g/m2
  6. Adhesive Req’d:      Approximately 20L every 30m2
  7. Warranty:                 8 years

HOW TO CALCULATE:

GRASS QUANTITY

Australian Industry Standard Roll Widths for this product are are 1.85, 2.8 and 3.66 mts wide and sold by the linea metre

INFILL QUANTITY

No infill requirements for Shield

DIRECT ALL OVER STICK

  1. Preference is to install Turf Wicket onto a clean concrete surface.
  2. Trowel adhesive evenly over clean concrete
  3. Ensure you allow enough time for any bubbling gas to escape
  4. Use heavy base roller to push out bubbling